NameLessRC N47, Руководство пользователя, Страница: 8 / 9

NameLessRC N47 FPV Racing Drone
Frequency and power control methods：
-The NLRC Nano400 VTX is set up via BFOSD Control (IRC Tramp)
-The NLRC Nano400 VTX’s default set up is lock on 25mw.
-To lock/unlock the VTX channels, please enter the PIT mode for three times
within 30secs after powering up the VTX (PIT mode switch is set in BF mode
page). The 3 LEDs will flash one by one if the VTX is successful to lock/unlock.
Please re-power the VTX after this step.
LED functions：
-Orange LED shows channels status. Green for bands and Blue for power.
-The Green LED flash after Orange and blue LED flash at the same time means
the VTX enter PIT mode successfully.
-The three LEDs will flash one by one after the VTX is powered. After that, each
LED will flash to show the channel, band & power’s status. Orange LED flash 1
time for Channel 1, 2 times for Channel 2. Green LED flash 1 time for Band 1, 2
times for Band 2 and so on. The three LEDs will flash one by one again after
finish showing the status.