NAMCO Prop cycle, Руководство оператора

Страница: 24 / 59

Page 24
7-1 Pedal Pressure Adjustment
This game is designed so that the pedal pressure can be adjusted. This will
have an effect on the difficulty of the game.
At the time of shipment, the pressure is set to a light setting.
The mechanism becomes uncovered so take care not to trap hands or
fingers in the mechanism
1) Remove the four security screws (M5x12) and remove the upper cover.
2) Remove five security screws (M5x20) and four security screws (M5x12)
and remove the right side cover.
3) To change the pedal pressure, loosen the truss screw (M5x12 Pozi) and
move the magnet unit. The pressure becomes less when the magnet unit
is moved away from the flywheel, and heavier when it is moved towards
the flywheel. Check the pressure by pedalling each time the magnet unit
is moved. When the required pressure is achieved, fully re-tighten the
truss screw.
4) Refit the side and top covers.