7
Rinse plate thoroughly in hot water and dry completely before reinstalling. A
hair dryer may be used to dry the plate more quickly.
How to change a plate
:
When running the device, it has a burning smell, and/or appears to be arcing
or sparking, then please remove and clean the ozone plates and reinstall; If
problem persist replace ozone plates.
Ozone produces a smell or odor that smells like bleach or electric smell. This is
normal during Ozone use.
8. REPLACING THE FUSE
Fuse holder (located on the back of the unit next to the power cord)
How to replace the fuse:
To replace fuse, pull out the plastic fuse holder
Remove old fuse and insert new fuse.
Replacement fuse must be 1 amp (0.79 inch).
9. TROUBLE SHOOTING
If you suspect a problem with your unit check the following:
• Unit is plugged in properly and turned on.
• Wall outlet is active
• Ceramic plates are clean and dry.
• There are no cracks in plates and each plate is flush with back of unit.
•
Fuse is installed properly and in good condition.