![background image](http://html1.mh-extra.com/html/namco/ace-driver-victory-lap/ace-driver-victory-lap_operators-manual_3157660027.webp)
Page 27
8-4-1
Replacing the Control Pot
1)
Disconnect the Control Pot connector.
2)
Loosen the grub screw .
Take care not to remove the screw completely.
3)
Loosen the pozi head screw retaining the Control Pot bracket and remove
the bracket with the Control Pot .
4)
Replace the Control Pot.
Note: Before re-tightening the grub screw
ensure that it engages on the flat of the pot
shaft.
After replacing the Control the game must be
re-initialized
(See section 7-4 "Adjustment
when Replacing Parts").
8-4-2
Replacing the Drive Belt or Steering Motor
1)
Disconnect the motor connector.
2)
Loosen the four nuts (M5) retaining the motor mounting bracket to the front
plate.
3)
Loosen the tension adjuster bolt (M6x60) and slide the motor mounting
bracket towards the main gear to release the drive belt.
4)
Remove the drive belt.
5)
Remove the four nuts (M5) and remove the motor
and motor mounting plate.
Note:- When replacing the drive belt, the centre part of
the belt should be able to bend approx. 2 to 3mm
when a force of 500g is applied
Содержание Ace Driver Victory Lap
Страница 10: ...Page 10 4 MAJOR COMPONENTS...
Страница 28: ...Page 28 9 PARTS...
Страница 34: ...Page 34 10 SHEMATIC...
Страница 35: ...Page 35...