!
ALNOR
®
systemy wentylacji
jest prawnie chronionym znakiem i technicznym patentem. Prawo do zmian zastrzeżone.
16
w
w
w
.al
nor
.c
om.
pl
Instrukcja obsługi
HRU-WALL-RC
Airflow direction
icon
Speed
icon
Speed icon
Boost icon
Speed
button
OFF button
Mode
button
Filter reset
button
Airflow direction
button
Boost
button
Filter reset
icon
Mode
icon
4. Operation
4.1 Remote controller
The unit is supplied with an infrared remote controller (K) as standard, as well as its support base (L) which
can be wall mounted. A magnet keeps the controller attached to the base.
The controller is equipped with an LCD display to visualise the setting to be transferred to the unit. Everytime
the button is pressed, the remote controller sends data to the unit. The acoustic signal confirms that the data
was recieved. The transmission is unidirectional, which means that the remote controller can not read data
from the unit. The IR receiver (J image pag.15) is placed on the left side of the ventilation unit: it is recom-
mended to point the controller towards the receiver when any setting needs to be transfered.
One remote controller can control more units.
NOTE!
To activate the remote controller it is necessary to insert two AAA type batteries (not sup-
plied).
external grille - installation
Ø5x40mm
5mm
cambio batterie telecomando
K
L
