Cleaning, maintenance and transport
In order to protect your product from being damage during transport;
The product has been packaged according to normal transport conditions. In order to avoid possible damage, it should always
be carried in its original package.
• The product shall be kept in its own package in a vibration-free, dust-free environment away from abrasive orchemical
material until it isdelivered to its placeof assembly. Do not accept the products which are not in their original package or
which were opened before being delivered to you.
• The products should be stocked into the vehicle in a way to stay motionless in case of any turn over or fall down.
• While heavy products are being carried, use appropriate lifters to protect products or the people carrying the products.
• All necessary measures should be taken in orderto prevent damages arising from sudden and careless lifting and putting down.
• The products should be carried one by one carefully. They shall not be thrown or carried carelessly from hand to hand.
Aftertaking the product out of its package:
• The delivered product should be checked.
• The product must be checked for damage during transport. If thereis any lost or damaged part, it should immediately be
nformed to the transporter or our firm verbally or by writing.
• Do not hold the product on its connection box or electric cables. Abstain from applications which will damage the wings or
the protective cage while carrying.
Periodic cleaning and maintenanceof the product:
• Before cleaning or maintenance, even if the product is turned off, be surethatelectric connection has been cut from the main
power supply.
• All electrical eqipment should be regularly controlled, connections should be checked and damaged or worn-out cables and
equipment should be replaced.
• Periodic maintenance should be carried out at least once every six months or more frequently, depending on its frequency
of use. Maintenance and cleaning of the productshould be carried out by qualified staff.
• Check the product regularly. In order to prevent dirt or accumulations in the wing, motor or grill, carry out the maintenance
according to the operating conditions of the product. Otherwise, the expected life of your product can be substantially
shortened or serious damage can occur.
• While cleaning the product, pay attention to protecting the balance on the wing and the turbine.
• Bolts which might become looseduring maintenance should be checked.
• Inappropriate parts should be immediately replaced.
• The product should not be cleaned with inflammable or combustible cleaners; it should be cleaned with a wet cloth.
• The product should in no way be exposed to water or pressure water
15
ALNOR
®
ventilation systems
is a legally protected trademark and technical patent. All rights reserved.
w
w
w
.ve
nt
ila
tio
n-a
ln
or.
co
.u
k
User manual
DV-ROF-R
