A3LA-RG Guide Version B
Document Number: 451-93156-009B
93 of 180
This command will transfer the contents of the mobile originated buffer to the mobile
terminated buffer. Developers of DTE can use this command to test reading and
writing to the A3LA-RG without actually initiating SBD sessions with the ESS.
Command Response:
0: Mobile originated buffer transferred successfully
1: An error occurred while transferring the mobile originated buffer
B.92 +CAR
–
A
UDIO
O
UTPUT
C
ONTROL
Set Command:
+CAR=<n>
This command switches the type of audio output between analog, digital and mute
(no audio output). Valid values for <n> are as follows:
0 mute
1 analog (Codec port)
2 digital (User Connector port)
Read Command:
+CAR?
This command queries the current audio setting. Response is in the form:
+CAR: <n>
Test Command:
+CAR=?
This command lists the supported values of <n>. Response is in the form:
+CAR: (list of supported values of <n>)
B.93 I
N
–
I
DENTIFICATION
Requests the A3LA-RG to display information about itself.
0 “2400” (traffic channel rate for IRIDIUM data/fax)
1 “0000” (ROM checksum which is not supported so zero is output)
2 “OK” (result of ROM checksum verification which is not supported so OK is
always
output)
3 “XXXXXXXX” (Software revision level)