![NAL RESEARCH CORPORATION QUICKSILVER QS-095 Скачать руководство пользователя страница 37](http://html1.mh-extra.com/html/nal-research-corporation/quicksilver-qs-095/quicksilver-qs-095_user-manual_704643037.webp)
Quicksilver QS-100 User Guide – Revision C
Document Number: 451-19004-001C
37 of 74
5.4
E
THERNET
(A
DMIN
O
NLY
)
The Ethernet page displays the current interface and DHCP configuration on the Ethernet
network (see Figure 28).
Figure 28: Ethernet Page
5.4.1
G
ENERAL
IP Address — Configures the default gateway of this network. It must be a valid IPv4
address. It must not belong to the same network defined in the Wi-Fi menu.
CAUTION:
If the user changes the address for accessing the configuration website, the
connection will be dropped and a new connection must be made to the new address.
Subnet Mask — Configures the netmask. It must be a valid IPv4 netmask.
5.4.2
DHCP
The following settings configure the dynamic host configuration protocol on this network. Any
changes to the general settings should be accompanied by an appropriate shift in the
configured DHCP ranges. The default range allocates 150 addresses.