A3LA-RS Quick Start Guide Version A
Document Number: 451-92899-002A
15 of 16
ii.
If NOT using the SatTerm software:
1.
Enter the following command AT+CPIN=“PIN code” (where the default PIN
code is 1111). If the PIN code is correct, the response is OK.
2.
Enter the following command: AT+CLCK=“SC”,0,“PIN code”. If the PIN code
is correct, the response is OK.
3.
The SIM is now removed and ready for use.
c.
If the response is PH PIN, then the surface control for the A3LA-RS is locked and the
phone PIN code needs to be entered in order to use the commands that operate
the A3LA-RS.
i.
To unlock the A3LA-RS surface control, do the same procedure in part 15.b
above except select CS instead of SC in step 15.b.i.2.
d.
If the response is READY or SIM PIN2, then the SIM is not locked and the A3LA-RS is
ready for use. No PIN code needs to be entered.
e.
If the response is SIM PUK or SIM PUK2, contact your service provider.
