9602-AB QUICK START GUIDE
451-92681-004A
2
EMERGENCY MODE
Activate: Quickly press and release the Emergency button to to trigger emergency tracking. The Emergency
LED illuminates.
Deactivate: Press/hold the Emergency button
longer than three (3) seconds to take the 9602-LP out of
emergency tracking.
POWER ON/ OFF DEVICE
1.
Press the Power button for two (2) seconds to turn on the
device.
The device starts in Track mode and sends out tracking reports.
1.
Depending on device configuration, press the Power button
for two (2) seconds to turn the device off.
CHARGE BATTERY
1.
Connect the USB-mini cable to the USB-mini connector port on the 9602 device and connect the USB connector on the
USB mini cable to the USB connector port on the AC Wall Adapter.
2.
Plug the AC Wall Adapter into power source.
Fully charge the 9602-AB before use. It must be kept in environments between 0°C (32°F) and 45°C (113°F) when
charging.
CONFIGURE DEVICE
1.
Connect the USB-mini cable to the USB-mini connector port on the 9602 device and connect the USB
connector on the other end of USB mini cable to the USB connector port on a DTE.
2.
Configure the device using SatTerm/At Commands.
