Nakayama PRO NS1610, Руководство пользователя

Страница: 3 / 6

EN
WWW.NAKAYAMATOOLS.COM
3
Operating instructions
After the packing box of new machine is opened please check all the parts conform to the drawing.
Then assemble the machine as per the structure sketch. Before use please wrench the cap off the container.
Pour the compounded medicinal liquid through the filter into the container slowly , then close the cap tightly and put the machine on your back. After the
pressure in the air chamber is boosted swing the operation arm and then press the switch component to begin spray operation. It can be point-spray or it can
be continuous spray. At the same time adjust the nut according to the requirement of the crops in order to improve the quality of spraying.
Choose the different spray-head for spraying correctly.
Accompanying with the machine delivered there are 3 Kinds spray heads (*not included in all mod -
els):
Fan style spray: This sprays evenly and is suitable for spraying on low and short stalked crops and for
the spraying of weedkiller. Keep the spray head stable and spray in the same direction as the wind.
Fan style spray head
Conical spray head: This can be used for spraying pesticide and insecticide, to prevent diseas -
es and kill insects. Spray in the same direction as the wind.
Conical spray head
4 Hole adjustable spray: This can be used for spraying on the high stalk crops and fruit trees.
Its shortcoming is the serious running off the medicinal liquid.
Adjustable spray head
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the
products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial busi -
nesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer
shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
Technical data
Capacity: 16Lt
Working pressure: 2-4Bar
Fixing and adjusting the extension spindle
Fixing:
At first, observe that the extension Spindle and the switch end have the rubber sealing gasket or not. If there is a gasket , then hold the switch handle tightly
and turn on the swindle (need no tool). If there is no "gasket" take a gasket ll from the spare parts bag. fix it at the end.
Adjust:
Close the switch, hold the outer extension spindle and loose the spindle nut then lengthen or shorten the inner spindle to achieve the necessary length, After
that wrench the spindle nut tightly, spray works begins at once.