11
Release blade.
Use screw driver to hold flange
and release nut, the blade can be took off.
Warning!
Please make sure the cutting head has been
assembled correctly before use!
Note:
The packaging material is made of recycle
materials. Dispose of packaging materials in
accordance with regulations.
Filling with fuel
DANGER!
Danger of injury!
Fuel is explosive!
- Turn off and cool the motor down before filling
the tank with fuel.
- You must observe all safety instructions relating
to handing fuel.
ATTENTION!
Risk of device damage!
The device is supplied without motor or gearbox
oil.
Before operating, you must fill it with fuel.
Never use oil for 4-cycle engine use or water
cooled 2-cycle engine.If can cause spark plug
fouling exhaust port blocking .or piston ring
sticking.
Mixed fuels, which have been left unused for
a period of one month or more may clog the
carburetor or result in the engine failing to
operate properly. Put remained fuel into an
airtight container and keep it in the dark and cool
room.
Mix a regular grade gasoline (leaded or
unleaded, alcohol-free) and a quality-proven
motor oil for air-cooled 2 cycle engines.
RECOMMENDED MIXING RATIO
GASOLINE 40: OIL 1
Warning! Take care of the emission of exhaust
gases.
Always shut off engine before fueling. Never
add fuel to a machine with a running or hot
engine. Take care of fire!
– Unscrew the tank cap and remove it.(B20)
– Pour in the fuel carefully (max. 1200ml). Avoid
spilling!(B21)
– Screw the tank cap on firmly by hand.
Draining fuel(B22)
– Hold a collection container beneath the fuel
drain bolt.
– Unscrew the tank cap and remove it.
- Allow the fuel to run out completely.
- Screw the tank cap on firmly by hand.
Start on the unit
Do not start the unit until it has been completely
assembled. Before switching on the unit, always
checking the oil
Check before use!
DANGER!
Danger of injury!
Do not operate the device unless you did not find
any faults. If a part has
became defective, make sure to replace it before
you use the device again.
Check the safe condition of the device:
– Check the device for leaks.
– Check the device for visual defects.
– Check that all parts of the device have been
securely fitted.
– Check that all safety devices are in proper
condition.
DANGER!
Danger of injury!
Содержание PB 6200
