Nakayama ET6000, Быстрый старт

Страница: 4 / 11

EN
WWW.NAKAYAMATOOLS.COM
4
21. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the
appliance.
22. The nylon line will run on for a few seconds after the tool is switched off ! Do not touch moving hazardous parts before
the machine is disconnected from the mains and the moving hazardous parts have come to a complete stop.
23. The type of extension cord to be used shall not lighter than H05VVF or H05RNF.
24. Always wear substantial footwear and long trousers while operating the machine.
25. Always disconnect the machine from the power supply.
- Whenever the machine is left by the user
- Before cleaning a blockage
- Before checking, cleaning or working on the machine
- After striking a foreign object to inspect the machine for damage
- If the machine starts to vibrate abnormally, for immediately check
26. Never to operate the machine with defective guards or shields, or without safety devices, or if the cord is damaged or
worm.
27. Do not connect a damaged cord to the supply or touch a damaged cord before it is disconnected from the supply for the
reason that damaged cords can lead to contact with live parts.
28. Disconnect the supply immediately in the event of accident or breakdown.
29. Connect the machine only to a supply circuit protected by a residual current device with a tripping current of not more
than 30 mA.
30. Avoid using the machine in bad weather conditions especially when there is a risk of lightning.
Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise
in connection with the tool’s construction and design:
1) Damage to lungs if an effective dust mask is not worn.
2) Damage to hearing if effective hearing protection is not worn.
Health defects resulting from vibration emission if the power tool is being used over longer period of time or not adequately
managed and properly maintained.
WARNING! This machine produces an electromagnetic field during operation. This field may under some circumstances
interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with
medical implants to consult their physician and the medical implant manufacturer before operating this machine.
Assembling
Assemble the protective cover and edge guide (see Figure)
1) Rotate the fixed trestle, Using 2pcs ST4 x 14 screw to
install edge guide
2) Hold the machine shelf, fitting the protective cover in
the machine shelf.
3) Align the protective cover and the machine shelf
together with 4pcs ST4 x 14 screw.
Assemble auxiliary handle (see Figure)
Assemble the auxiliary handle to the mount provided,
then secure the auxiliary handle with the help of the
screw and the adjustment lock provided.