Nakayama ES1200, Оригинальное руководство пользователя

Страница: 11 / 36

11
tool in unexpected situations better.
f) Wear suitable clothes! Do not wear loose
clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts.
Loose
clothing, jewelry, or long hair could get caught
by the moving parts.
g) If dust extraction equipment and dust
collection facilities can be installed, make
sure that they are connected and are correctly
used.
Using a dust extraction system can reduce
the hazards caused by dust.
5.4 Using and handling the power tool
a) Do not overload the device. Use the
particular power tool meant for your work.
With the appropriate power tool, you will work
better and more safely in the specified output
range.
b) Do not use any power tool, which has a
defective switch. A power tool, which cannot
be switched on or switched off any more is
hazardous and must be repaired.
c) Remove the plug from the wall socket
and/or remove the battery before you make
changes to unit’s settings, change accessory
parts or put away the device.
This precautionary
measure prevents the accidental start of the
power tool.
d) Keep unused power tools out of the reach
of children. Do not allow persons to use the
device, who are not familiar with this device
or who have not read these instructions.
Power tools are dangerous, if they are used by
inexperienced persons.
e) Maintain your power tools with care. Check
if the moving parts are working properly and
do not jam, whether parts are broken or are so
damaged that the function of the power tool
is impaired. Get the damaged parts repaired
before using the device. Many accidents are the
result of poorly maintained power tools.
f) Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are easier
to handle.
g) Use power tools, accessories, insertion tools
etc., as per these instructions. While doing so,
please consider the working conditions and
the work to be carried out.
The use of power
tools for purposes other than the intended
applications can lead to dangerous situations.
5.5 Service
A) Get your power tool repaired only by
qualified personnel and only with original
spare parts. WIth that, it will be ensured that the
safety of the device is maintained.
6. Special Safety Instructions
6.1 IMPORTANT for the power tool
Read thoroughly before use. Keep these
instructions safe, so that you can read them
later.
- Keep all your body parts far from the power
tool, when it is running. Before starting the
electric tool, make sure that the device is not
touching anything.
When working with the
electrical tool, a moment of carelessness can lead
to the clothing or parts of your body to be caught
by the power tool.
- Hold the power tool always with your right
hand on the rear handle and your left hand
on the front handle. Holding the electric tool
in reverse working position increases the risk of
injury and should not be done so.
- Wear protective glasses and hearing
protection. Additional protective
equipment for head, hands, legs and feet is