Nakayama EM3210, Быстрый старт, Страница: 8 / 15

EN
WWW.NAKAYAMATOOLS.COM
5
Description of main parts (Picture A)
1. Upper handlebar
2. ON/OFF triggers
3. Upper hand knob tightening screw
4. Lower handlebar
5. Lower hand knob tightening screw
6. Carrying handle
7. Front Wheel
8. Rear Wheel
9. Grass Collector
10. Grass Collector carrying handle
11. Cable Hook
12. Rear Roller
Intended Use
This machine was designed and manufactured for mowing lawns, according to its cutting capacity.
This machine is intended for use by non professional operators (not professionals).
The machine is intended for domestic use only.
Before Each Use
• Before each use, you must ensure that the lawnmower is in a safe working condition. Inspect the blade and check all the safety devices and attachments as
well as all the nuts, bolts and screws to make sure that they have been placed with safety.
• When selecting an extension lead make sure that the extension lead is designed for outdoor use. Always choose an approved cable extension suitable for
the power rating of this tool. In case of using a cable reel, always completely unwind the cable from the reel. It is recommended that the mower must be
connected to a Residual Current Device (RCD).
Assembly instructions and main adjustments (Pages 3- 4)
Caution! The machine must not be operated before all assembly work has been completed!
1. Insert the lower handlebar into the M8 bolt and lock the A-type hand knob. Fix the lower handle.
2. Connect the lower and upper handlebars, and lock the hand knob.
3. Snap the power cord into the line card. Fix the cable on the cable hook.
Grass collector assembly (if not pre-assembled by the factory):
1. Connect the handle to the grass collector upper cover.
2. Attach all three parts of the grass collector together.
3. Lift the flap located at the rear of the machine and then connect the grass collector.
Adjusting the cutting height:
1. Adjust the wheel height by pulling outwards the axle.
2. Adjust the cutting height (from high to low) as the axle height (from low to high).
Operating instructions
Switching on the motor
Only start the lawn mower on even ground and not within long grass. The ground must be free of foreign obstacles such as stones. Do not lift the lawn mow-
er in order to start it.
Press the safety switch located on the control box in the middle of the handlebar, then pull each trigger against the bar according to the pictures on the
button and keep them pressed.
Switching off the motor
Release the triggers.
Wait until the blade has stopped moving.
Work instructions
Carefully check the entire area to be mown and remove all foreign objects.
Only operate the lawn mower if there are no third parties in the danger area.
Only mow if visibility is good.
Only operate the machine at walking pace, never run when mowing.
Only operate the mower if the blade is in a good state and sharp.
Do not mow over obstacles (e.g. twigs, tree roots).
On sloping terrain, always mow across the slope. Do not mow uphill or downhill or on slopes where the inclination exceeds 20°.
Exercise particular care when changing direction on sloping terrain.