EN
WWW.NAKAYAMATOOLS.COM
4
Description of machine parts
Operating instructions
Connection
- This hedge trimmer may only be connected to single-phase AC source. Ensure that the mains voltage is the same as the operating voltage indicated on the
rating plate.
- Connect the power plug to the coupling of an appropriate extension cord. Form a loop, push it through the opening in the rear handle and hook over the
cable holder.
Starting the machine
Warning! Only use this machine for applications described in the chapter ‘application range’
- Switching on: Press the on/off switch (3) of the front handle and the switch (1) of the rear handle with both hands at the same time.
- Switching off: release any one of the switch (3) or (1).
- The blade brake makes the blades stop immediately within 0.5s the small flash in the area of the upper ventilation slots is normal and does not harm to you
or the machine.
Cutting hedges
- Before you start your work, select branches with a diameter not bigger than 20mm and cut them with a pruning shear. A trapezoidal cut corresponds to the
natural, growth of plants and results in optimal hedge growing.
- First cut the sides from the bottom to the top. Cut the upper part giving it the shape you prefer, in a straight horizontal form, roof-like or rounded.
- The lever guide will help you to control the blade in horizontal
- The safety blade has laterally rounded and staggered cutting teeth to reduce danger of injury. The additional shock protection avoids inconvenient kickback
when the blades come into contact with walls, fences etc.
- If the blades are jammed or blocked by obstacles, switch the motor off immediately, pull the plug, and then remove the object jamming the blades.
- Caution! Metal obstacles like fences etc. may damage the cutting blades.
- Always make sure to keep the extension cord behind your back and to start cutting the hedge at the point nearest to the supply socked. Therefore plan your
working direction before starting.
1. Rear handle with on/off switch
2. Housing
3. Front handle with on/off switch
4. Blade
5. Cable and plug
Before starting the machine
Содержание EH7750
