Nakayama EB3500, Руководство пользователя, Страница: 14 / 24

14
WWW
.N
AKAYAMA
T
OOLS
.
COM
- To prevent dust irritation the wearing of a face mask is recommended.
- Before using, check the supply and extension cord for signs of damage
and aging. Do not use the appliance if the cord is damaged or worn.
- Never operate the appliance with defective guards or shields, or without
safety devices, for example debris collector in place.
-
Only use a weather proof extension cable fitted with a coupler
3) Operation
- Always direct the cable to the rear away from the appliance.
- If a cord becomes damaged during use, disconnect the supply
cord from the mains immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.
- If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
- Do not carry the appliance by the cable.
- Disconnect the appliance from the mains supply
· whenever you leave the machine;
· before clearing a blockage;
· before checking, cleaning or working on the appliance;
· if the appliance starts to vibrate abnormally.
- Operate the appliance only in daylight or in good artificial light.
- Do not overreach and keep your balance at all times.
- Always be sure of your footing on slopes.
- Walk, never run.
- Keep all cooling air inlets clear of debris.
- Never blow debris in the direction of bystanders.
- Recommendation to operate the machine only at reasonable
hours- not early in the morning or late at night when people
might be disturbed.
- Recommendation to use rakes and brooms to loosen debris
before blowing/vacuuming.
- Recommendation to slightly dampen surface in dusty conditions
or use mister attachment.
- Recommendation to use the full blower nozzle extension so the
air stream can work close to the ground.
4) Maintenance and storage
- Keep all nuts, bolts and screws tight to be sure the appliance is
in safe working condition.
- Check the debris collector frequently for wear or deterioration.
- Replace worn or damaged parts.
- Use only genuine replacement parts and accessories.
- Store the appliance only in a dry place.
SAFE OPERATION
Know Your Power Tool
It is important that you have read and understood your instruction
manual and any label attached to the power tool. Learn its
applications as well as its limitations and the potential hazards
associated with this power tool.
Work Environment
Do not expose your power tools to rain, or use in damp or wet
locations. Keep the work area well lit. Do not use power tools in
areas where there is a risk of explosion or fire from combustible
materials, flammable liquids, paint, varnish, petrol etc. Flammable
gases and dust of an explosive nature, as a precaution it’s