www.NakayamaTools.com
15
Warning! Always push
the lock
-
off button
③
to
“OFF
” position.
Always wear protective gloves when using, adjusting
or cleaning the machine.
Never attempt to operate the machine without
the blade, spacer or screw correctly
secured
to prevent damage to the machine.
STEP 1
STEP
2
STEP 1:
Using a 5 mm hex wrench
⑩
(provided) to loose the blade screw
11
which secures
the blades. Remove the bush
12
.
Remove the moving blade
②
as shown
.
Be careful not to allow any foreign matter to become attached to the blade gear and do
not damage
it.
(Must make the moving blade
to occupy opens or partly opens the
condition.)
STEP 2:
Insert
the moving blade
②
to fit
the screw hole
as shown
.
Refit the bush 12. Ensure the bush
12 is located through fixed blade and moving blade.
Refit the blade screw 11 and tighten it by using a 5 mm hex wrench
⑩
(provided)
.
Do not
overtighten.
6.
After Pruning/Storage
�
Warning!
Always push
the lock
-
off button
③
to “
OFF
” position.
�
Always wear protective gloves when using, adjusting or cleaning the machine.
Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water,
