Nakayama 023739, Руководство пользователя

Страница: 6 / 12

6
WWW
.N
AKAYAMA
T
OOLS
.
COM
-If the blades are jammed or blocked by obstacles, switch the motor off immediately, pull the plug, and then remove the
object jamming the blades.
-Caution! Metal obstacles like fences etc. may damage the cutting blades .
-Always make sure to keep the extension cord behind your back and to start cutting the hedge at the point nearest to the
supply socked. Therefore plan your working direction before starting.
Maintenance and cleaning
-Before carrying out any checks or maintenance operations, disconnect the plug from the electric power supply.
-Check your machine regularly before starting the work.
-Damaged cutting blades have to be repaired or exchanged by a qualified service man before working with the machine.
-After each cutting operation, clean the cutting blade with a soft brush and cloth with lubricating fluid oil and spray a thin
layer of fluid protective oil on the completes blade.
-Always keep the ventilation slots in motor housing clean.
-Never clean or spray a machine with water. Clean the motor housing only with a moist cloth and never apply detergents or
solvents! These could ruin the plastic parts of the machine. Finally, dry the motor housing carefully.
-Store the machine with the supplied protection cover.
-Only use original accessories and spare parts.
Technical Data
Voltage/frequency: 230v-50Hz
Input power: 710w
No load speed: 1500rpm
Max. Cutting dia.:24mm
Blade length: 710mm
Cutting length: 650mm
Handle rotary:-90°to 90°
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior
notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated
in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line
with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty
will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement
work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service
department of the manufacturer.