Nakayama 020356, Руководство пользователя

Страница: 16 / 24

16
WWW
.N
AKAYAMA
T
OOLS
.
COM
Maintain Tools with Care
Follow the instructions for lubricating and changing accessories.
Check the tool power cord periodically and if damaged have it
replaced by an authorized service facility.
Inspect extension cords periodically and if damaged replace it.
Keep handles dry, clean and free from oil and grease.
Ensure that ventilation slots are kept clean and free from dust at all
times. Blocked ventilation slots can cause overheating and
damage to the motor.
Disconnect Power Tools
Ensure that power tools are disconnected from the mains supply
when not in use, before servicing, lubricating or making
adjustments and when changing accessories such as blades, bits
and cutters.
Remove Adjusting Keys and Wrenches
Avoid Unintentional Starting
Ensure that the switch is in the OFF position before plugging the
power tool into the mains supply.
Extension Cords and Reels
The appliance should be supplied via a residual current device
(RCD) with a tripping current of not more than 30 mA.
When the power tool is to be used outdoors, use only extension
cords intended for outdoor use and are so marked.
Always unwind any extension cords fully.
For extension cords up to 15 meters use a wire cross section of
1.5mm
2
.
For extension cords over 15 meters but less than 40 meters use a
wire cross section of 2.5mm
2
.
Always replace a damaged extension cord before using it.
Protect your extension cord from sharp objects, excessive heat
and damp or wet locations.
Stay Alert
Watch what you are doing, use common sense, and do not
operate the power tool when you are tired, if taking medication that
causes drowsiness, when having consumed alcohol or taken
drugs.
Check Damaged Parts
Before using the power tools it should be carefully checked to
determine that it will operate properly and perform its intended
function.
Check for the correct alignment of moving parts ensuring they do
not bind. Check for broken or missing parts and have them