Nakayama 000495, Руководство пользователя

Страница: 34 / 41

34
WWW
.N
AKAYAMA
T
OOLS
.
COM
MAINTENANCE
The purpose of the maintenance schedule is to keep the tiller in the best operating condition, inspect
or service as scheduled in the table below.
WARNING Shut off the engine before performing any maintenance. If the engine must be run,
make sure the area is good ventilated. The exhaust contains poisonous carbon monoxide gas.
CAUTION: Use only genuine parts or their equivalent. The use of replacement parts which are not
of equivalent quality may damage the engine.
Maintenance Schedule
REGULAR SERVICE
PERIOD Perform at
every indicated month or
operating hour interval
whichever occurs first
ITEM
Daily
First
month
or 20 Hrs
Every
3 months
or 50 Hrs
Every
6 months
or 100 Hrs
Every year
or 300 Hrs
Engine oil
Check
level
O
Change
O O
Air cleaner
element
Check
O
Clean
O (1)
Fuel
strainer cup
clean
O
Spark plug
Clean
readjust
O
Transmissi
on gear oil Check
level
O
Tappet
clearance Check
readjust
O (2)
Fuel tank
and strainer
Clean
O (2)
Clutch
cable
Adjust
O O
Throttle
cable
Adjust
O
Belt tension Adjust
O O
Fuel line Check
Every 2 years (2) (Replace if necessary)
NOTE: (1) Service more frequently when used in dusty areas.
(2)These items should be serviced by an authorized dealer, unless the owner has the proper
tools and is mechanically proficient. See the shop Manual.
1. Changing oil
Drain the oil while the engine is still warm to assure rapid and complete draining
·
Remove the oil filler cap and drain the oil.
·
Refill with the recommended oil and check the level.
Oil capacity:0.6 L
(1) DRAIN PLUG
(2) OIL FILLER CAP
(3) UPPER LEVER