SURFACE GRINDING
1. Securely hold the angle grinder and handle.
2. Turn on the switch of the vacuum and angle grinder.
3. Place [a] Main Unit on material slowly, then move
the Angle Grinder toward the grinding direction.
(Fig.9)
-3-
6. Attach the Handle to the Grinder and
connect the Vacuum Hose into the Duct with
[ g ] Joint. (Fig.7)
7. If the Handle comes in contact, detach the
Side Cover from [a] Main Unit. (fig.8)
Fig.7
Fig.8
1. Detach the Front Cover and Side Cover from [a] Main Unit. (Fig.10)
2. Attach the Front Cover and Side Cover to [a] Main Unit, with its position changed. (Fig.11)
Fig.9
Fig.11
Handle
Vacuum Hose
Duct
[g]
x 2
Side Cover
CORNER GRINDING
Fig.10
Side Cover
x 2
Front Cover
x 2
[a]
x 2
x 2
Front Cover
Side Cover
※
※
100
～
115mm Cup doesn't need the Side Cover.
