METABO
BOSCH
HiKOKI
MILWAUKEE
MAKITA
FLEX
DWE494 type
DWE4579 type
DEWALT
[k]
T9.4
[g]
T3.4
[ i ]
T7.5
[ h ]
T6.0
[m]
T10.6
Fig.10
Fig.11
[ f ]
[g] [h] [i] [k] [m]
[ e ]
[ p ]
[ d ]
Diamond
Grinding
Cup
Lock Nut
Wrench
8.
Tighten [e] Flange Bolt x 4pcs by [p] Hex Wrench.
(Fig.10)
9.
Remove [d] Centering Holder.
10.
Set the proper Spacer [g] / [h] / [ i ] / [k] / [m] on the
spindle of the angle grinder.
==> See the table below.
11.
Set [ f ] Base Flange on Spacer.
12.
Set the Diamond Grinding Cup on [ f ] Base Flange
and tighten the Lock Nut by Wrench.
(Fig. 11)
13.
Confirm the clearance (min.1mm) between the Diamond Grinding Cup and the material. (Fig.12 and 13)
-3-
O K
N G
14.
Fit the Handle to the angle grinder.
15.
Connect the Vacuum Hose to the Duct of the [a] Main
Body using [q] Hose Connector.
(Fig.14)
[CAUTION]
Use the Vacuum with Input Power 1,500W or more for best
possible performance and dust extraction.
Min. Clearance 1mm
[ q ]
Vacuum
Handle
Duct
Fig.12
Fig.13
Fig.14
