2-2
2-1
①
②
A
B
①
②
①
②
• Controller
• Foot switch
• Handpiece
• Main power cord
• Electroplated diamond file
• Tip holder (Flat)
• Wrench: 2 pcs.
• Hexagon wrench
• Tip holder (Round)
• Fuse
• Tool box
• Operation Manual
Connecting the cords to back of controller
1
Remove the test horn
2
Tool installation
3
Main power cord
Handpiece
Foot switch
Back of controller
Align each
●
marks and
insert the plug.
Remove the test horn
using attached two
wrenches.
Turn the
protector sleeve
and remove it.
Electroplated
diamond file
(One piece tool)
Tighten firmly using attached two
wrenches
Ceramic fiber
grindstone
Insert the protector sleeve
into the handpiece and turn
it to install it.
1. Attach the tip holder to the handpiece and
tighten firmly with two wrenches.
2. Insert the ceramic fiber grindstone into the
tip holder(
①
) and tighten the set screw firmly
with the attached hexagon wrench(
②
).
Common to A and B
*Always make sure that the protector
sleeve is installed before using the
handpiece, as using the handpiece
without it may result in burns.
A
B
• Ceramic fiber grindstone
Clamp with the tip holder
(Flat) for use.
Setup Guide
Ultrasonic Polisher
Bundled items
See attached operation manual
for details.
