PRODUCT INFORMATION
WHAT’S IN THE BOX
INSTALLATION
Check and identify the contents of your package:
Tweeter
20
102
30
42
4
89
800Hz
～
20KHz
ASV 25mm
-
Woofer
75
140
1530
75
4
88dB±3dB
50Hz
～
8KHz
KSV 35mm
20
Specifications
RMS.Power(W)
Mounting Diameter(mm)
Net Mass(g)
Mounting Depth(mm)
Sensitivity@1w/1m(dB)
Frequency Range
Nominal lmpedance(Ω
）
Voice Coil
Magnet Mass(Oz)
6. Network (x2);
7. 2.5mm “L” Type Wrench (x1);
8. 3.0mm “L” Type Wrench (x1);
9. Mounting Screw M3x10mm (tweeter) (x6);
10. Mounting Screw M4x30mm (woofer
、
network) (x16);
1. Installation Manual (x2);
2. Woofer (x2);
3. Woofer’s Grille Net + Frame (x2);
4. Tweeter (x2);
5. Tweeter’s Back Cover (x2);
Fig.1
Fig.2
Fig.3
Fig.4
You can mount the woofers on the front/rear door of your car.
Option 1: Mount the woofer on door (front or rear)
★
★
★
Make sure that nothing obstructs around the mounting location of the door.
A hole for mounting may already be cut out of the inner panel of the door(front or rear). In this care, you need to modify the board only.
Ensure that the speaker terminals, frame or magnet do not interfere with any inner parts, such as the window), etc. Also ensure
that the speaker grille does not touch any inner fittings, such as the window cranks, door handles, arm rests etc.
1. Turn off the car ignition key.
★
If the power is on, the click noise generated by the connection may damage the speakers.
2. Cut out the mounting template from the packing box.
3. Paste the template on the location selected for mounting the speaker.
4. Mark the cut-off hole and the 4 bolt holes. (Fig.1)
5. Cut out the marked area and drill the bolt holes. (Fig.2)
6. Remove the grille net. (Fig.3)
7. Connect the woofers to the network or car audio.
(See ’How to complete the wiring.’)
8. Mount on the speaker as shown below. (Fig.4)
9. Press and insert the edges of the grille net.
★
The speaker grille can be mounted without the grille net, if you like.
