Nakamichi NGXA80.4, Руководство пользователя

Страница: 9 / 12

8 EN
POWER CONNECTION LEADS
NOTES ON THE POWER SUPPLY:
● Connect the +12V power input lead only after all other leads have been connected.
● Be sure to connect the ground wire of the unit securely to a metal part of the car.
● A lose connection may cause a malfunction of the amplifier.
● REM: The unit is turned on by ap12 Volts to this terminal. This terminal does not draw
heavy current like the tow Power Terminals so a thinner connecting wire is acceptable.
Standard 18 GAUGE is fine and the standard color is yellow.
If the radio is equipped with a Power Antenna control wire, it can drive this terminal. If the
Power Antenna wire is already in use, you can still splice into it. With this method, the unit will
turn on automatically with the radio.
● Use the power supply lead with a fuse attached whose value is the same as original fuse.
● Place the fuse in the power supply lead as close as possible to the car battery.
● During a full power operation, Maximum current will run through the system. Therefore make
sure that the leads to be connected to the +12V and GND terminals of the unit respectively
must be larger than 10-Gauge (AWG.10).
BATTERY
DC 12V
To a metal part of car
HEAD UNIT
FUSE
(+12V) SENS OUT
POWER