Nakamichi NDS6120, Руководство пользователя

Страница: 4 / 12

1. T he controller port
2 . AUX Low Level Output Port
7. AUX low level input port
UI Introduction
The machine interface diagram is as follows ：
5. Fiber port
6
. External Digital Bluetooth Input
8. Machine start mode switch
9. Power indicator light
10.High level input and output port
1 2
7 10 4
3
5 6 8 9
Data call and total volume adjustment can be performed by the line controller.
Low Level RCA Output, connect up to 12 channels speaker input.
3 . USB Port ,Connect to the computer tuning software.
No need to download the driver installation, connected to the computer sound software installed
automatically
Connect the car CD or DVD coaxial cable to switch the machine audio source to digital input to play
coaxial digital signals.
Connect the car CD or DVD fiber optic cable, switch the machine audio source to digital input, and
play the optical digital signal.
Connect the external Bluetooth, the LED indicator will flash, the indicator will stop flash and will be
always on once you have connected your Mobile phone to the device, then you can play music in
your phone, and the device will change the high level input to Bluetooth Input.
Low Level Output, connect up to 6 channels speaker input.
When the switch is turned to the "ACC" terminal, the machine is started by ACC, and when it is
turned to the "HOST" terminal, the machine is started by the high level input signal.
NC
GND +12V
REM
OUT
ACC
NC
+
IN6
+
IN5
+
IN4
+
IN3
+
IN2
+
IN1
NC NC
-
IN6
-
IN5
-
IN4
-
IN3
-
IN2
-
IN1
“+” is positive or positive; “-” is negative or
inverted (ground).
Only the special wire for the original car is selected,
or the user can define the external wiring material by himself.
Notes: Android Phone, APP function only can be used when on Bluetooth Mode.
2EN
4. Coaxial port
Before connecting the power supply, you must confirm that the power supply meets the power
requirements of the device and connect in strict accordance with the device instructions.Failure to
do so may result in damage to the equipment and may cause accidents such as fire,electric shock,etc.