1.
2.
3.
4.
5.
1.
2.
Insert the USB device’s USB plug into the socket on the front of the unit.
Press the
CD/USB
button on the remote control or rotate the
SOURCE
select button on
the Ampllifier to select the USB function. The word “
USB
” will be displayed on the front
panel.
The device’s stored music will be played automatically.
When you store more than one folder in the USB flash, use the ALBUM button or
ALBUM button on the remomte control to select the next/previous folder. Then choose
the track with the or button to play the folder.
The unit supports USB music file formats MP3, WMA only.
By connecting an USB mass storage device (including USB flash memory, USB flash players or
memory cards) to this unit, you can enjoy the device’s stored music through the unit.
Please Note:
USB connection is not compatible with all hard drive models.
20
Use the USB
Insert one plug of the USB cable (not supplied) to the socket on the unit.
Insert the other plug of the USB cable to the USB output terminal of the USB device.
For devices with USB cables
1.
2.
For memory cards
Insert the memory card into a card reader (not supplied).
Use a USB cable (not supplied) to connect the card reader into the socket on the unit.
•
•
•
USB Storage Device Data Protection
Always insert the USB device in the correct direction. Failure to do so may result in
damage to the USB device and this unit.
Do not remove the USB device while it is being accessed.
Electrical interference and electrostatic discharges may cause the USB device to malfunc-
tion and suffer damage, resulting in data loss.
It is strongly recommended that any important data is backed up on a PC to protect against
corruption, data loss or device malfunction. Please note that our company shall not accept any
liability for damage or loss of stored data.
