NAiS GT01, Техническое руководство

Страница: 37 / 108

Installation and Wiring
GT series
17
2.3 Wiring the COM. Port
2.3 Wiring the COM. Port
2.3.1 Wiring the COM. Port
Accessory communication connector/applicable wiring
The communication connector used for the COM. port (provided as an accessory with
the main unit) has a screw-tightening type of terminal base. The wiring shown below
should be used.
Applicable wiring (twisted wiring)
Size Conductor Cross-Section Surface Area
AGW#28 to 16 0.08 mm
2
to 1.25 mm
2
Use a special tool to tighten the terminal base of the communication connector
Using a screwdriver made by Matsushita Electric Works Co., Ltd. (Product number
AFP0806). The tightening torque should be 0.22 N
·
m to 0.25 N
·
m or less.
2.3.2 Wiring Method
(1) Remove the sheath from the wire.
7 mm/0.28 inch
(2) Insert the wire all the way into the terminal base, and tighten the screw in the
clockwise direction to secure it.