NAiS EBL512, Руководство по эксплуатации

Страница: 71 / 116

Matsushita Electric Works Fire & Security Technology AB
MEW00442 Rev: - Operating Instructions EBL512, V1.44.x
69
24.9 Alarm device on / Alarm device off (H2/B9)
Outputs programmed as type 3 = alarm device (sounder) can be
disabled all at the same time.
Alarm device off means that even if the
control condition (expression) for resp. output is fulfilled, the outputs
will not be activated.
Alarm device off is indicated by LED "Disabled" and is shown in
menu H4/U1.
Don't forget to re-enable the outputs again, i.e. Alarm device on
via menu H2/B9.
NOTE! This function is not the same as for push button "Silence".
(See chapter "Push button "Silence"", page 22). This function has
higher priority than "Silence".
Action Text in display Comments
"Access"
According to chapter
"Access", see page 57.
Scroll to menu H2.
Disable or re-enable
ACCEPT? H2
"A"
Disable zone
ACCEPT? B1
Scroll to menu B9:
Alarm device on / Alarm device off
ACCEPT? B9
"A"
Alarm device off(=0) or
alarm device on(=1)? 1 ACCEPT?
Push "1" or "0" and push
"A" to accept.
"A"
Alarm device on / Alarm device off
ACCEPT? B9
Scroll or push "Return" to
menu H2. Scroll or push
"Return" to logout.