NAIM Solstice, Руководство пользователя

Страница: 11 / 17

17 18
Using the lift lever, lower the arm so the stylus contacts the measuring area.
Read the measured force. Note the value. If adjustment of the tracking force is
required please lift the arm using the lever before making any counterweight
adjustments and then reset the stylus back onto the digital stylus gauge.
When playing a record, use the VTA adjustment and the mini level to ensure
the arm is perfectly flat whilst playing. VTA adjustment can be performed
whilst listening to a record, allowing adjustment for various weights of record
pressing.
There are great benefits in optimising the playing weight of the cartridge by
listening. Small changes in playing weight can make a big difference. Naim
suggest a playing weight between 2.2g and 2.4g as the optimal range. Always
check with the stylus gauge that the playing weight is within the
suggested range after listening optimisation.
EQUINOX
6.6 ARO tonearm alignment
Alignment of the ARO tonearm is performed using the small bubble level to
ensure the arm is perfectly flat whilst playing.
Adjust the Vertical Tracking Angle (VTA) by rotating the VTA adjuster
horizontally to raise, or lower the arm whilst the arm is in the rest.
VTA can be adjusted for personal preference according to record pressing in
this manner using the micro spirit level.
Adjust the cartridge azimuth by rotating the cartridge adjuster. Allow the arm
to settle after adjustment. Make small adjustments to both azimuth and VTA in
the rest as required, until the small bubble level indicates the arm remains level
in all directions whilst playing.
Notes on dissembling NVS TT:
If removing the platter, the sub platter and bearing housing will be pushed up by the
magnetic force. When removing the platter, reach underneath the platter and hold the
sub platter down to avoid the risk of any damage to the sub platter or chassis.