NAIM PREAMPLIFIERS Скачать руководство пользователя страница 24

e22

NAIT  XS  Integrated  Amplifier

22  naIT  Xs  Introduction,  Installation  and  Connections

The naIT Xs should be installed on a dedicated equipment stand intended for the 
purpose. Do not stand it directly on top of another item of equipment. Care should 
be taken to ensure that it is level. The amplifier should be installed in its final location 
before connecting cables or switching on. ensure that the volume is turned down before 
switching on.

a variety of power supply upgrade, alternative preamplifier and alternative or additional 
power amplifier options are possible for the naIT Xs. Diagrams illustrating the connection 
of some of these are shown in section 23. Contact your local retailer or distributor for 
advice on further alternative connection schemes.

The NAIT XS incorporates an AV Bypass switch on its rear panel. The switch should only 
be set to “On” if the amplifier is to be used in conjunction with an AV processor in a 
home theatre system. In all other installations the AV Bypass switch should be set to “Off”. 
Speaker and/or amplifier damage may occur if a signal is inadvertently connected to the 
NAIT XS av input while the AV Bypass switch is “On”.

operational features common to all preamplifiers and integrated amplifiers are described 
in section 28.

22.1  mains  Power  Connection

Connect the NAIT XS to a mains power socket using either 
the mains cable supplied or a Naim Power-Line.

22.2  signal  Inputs

The NAIT XS front panel input buttons select the source 
input signal to be routed to the integral power amplifier 
and the loudspeakers. The six buttons are labelled 

cd

tuner

hdd

av

aux 1

 and 

aux 2

.

The 

cd

tuner

hdd

 and 

av

 input buttons select parallel DIN 

and RCA phono input sockets on the rear panel.

note:

 The hdd and av sockets carry both inputs and 

outputs. See Section 22.4 for more information.

The 

aux 1

 input button corresponds to a pair of RCA 

phono sockets on the rear panel and a parallel 3.5mm 
stereo jack socket on the front panel. Insertion of a plug 
into the front panel 

aux 1

 socket will automatically switch 

the amplifier to that input. Removal of the plug will return 
the amplifier to the previously selected input. If a different 
input is selected while a plug is inserted removal of the 
plug will not cause the input to change. 

The 

aux 2

 input button corresponds to a DIN input socket 

on the rear panel. The 

aux 2

 DIN socket also carries a 

power  supply output suitable to power a Naim 

stageline

 

or 

superLine

 phono preamplifier.

note:

 For optimum sound quality DIN sockets should be 

used in preference to RCA phono sockets.

note:

 Where an input has DIN or Phono socket options only 

one should be connected at any one time.

Always use high quality interconnect cables to connect 
sources to inputs. The Naim Hi-Line will produce the best 
results.

22.3  speaker  outputs

A set of stereo speaker connection sockets is provided on 
the rear panel. Custom Naim loudspeaker connectors are 
supplied to make the connection and in order to comply 
with current European safety regulations these should 
always be used. Naim speaker cable will provide the best 
results, however, a wide range of speaker cable types can 
be used without risk of damage to the amplifier.

Ensure when connecting speakers that they are “in 
phase”. That is, the positive and negative connection 
orientation at both the speaker and amplifier ends of the 
cable is the same for both channels.

22.4  AV  and  hdd  Inputs  and  Outputs

The NAIT XS 

av 

and

 hdd

 inputs have associated outputs 

that enable the selected input signal to be routed 
externally; to an audio recording component for example.

note:

 The av or hdd outputs will be muted if their 

corresponding inputs are selected. 

22.5  AV  Bypass

The NAIT XS can be integrated within a multi-channel 
home theatre system, driving the front left and right 
channel speakers, by engaging its AV Bypass mode. AV 
Bypass mode enables a home theatre processor to take 
over volume control of signals connected to the NAIT XS 

av

 

input. It is engaged using the switch on the rear panel. The 
NAIT XS volume control indicator will extinguish when AV 
Bypass mode is engaged and the av input is selected. The 
remote handset volume control will also be disabled.

operational features 
common to all 
preamplifiers and 
integrated amplifiers 
are described in 
section 28

Содержание PREAMPLIFIERS













































Отзывы: