NAIM NA-P 200 - AMPLIFIER Скачать руководство пользователя страница 4

3

In some circumstances, depending on where you live and

the earthing arrangements in your home, you may

experience radio frequency interference. Controls on

broadcasting in some territories allow very high levels of

radio frequency radiation and both the choice and exact

siting of equipment may be critical. If there is a known

problem in your locality it is advisable to arrange for a

home demonstration before purchase to find out if Naim

equipment is likely to be affected. Susceptibility to radio

frequency interference is related to the wide internal

bandwidth necessary for high sound quality. Systems

incorporating moving coil phono preamplifiers and active

crossovers are more likely to suffer. A radio frequency filter

kit is available for some Naim equipment but sound quality

will be progressively compromised as more elements of the

kit are fitted. In situations of extreme radio interference

Naim equipment may be unsuitable.

Your Naim hi-fi system can be damaged by lightning. Power

amplifiers are particularly at risk and should be turned off

when there is risk of lightning strike. For complete

protection all mains plugs and any aerial cables should be

disconnected when not in use.

Equipment must not be exposed to dripping or splashing

and no objects filled with liquid, such as vases, should be

placed on the equipment.

Use of non-standard speaker cables or interconnects may

invalidate your guarantee.

5 Connection

5.1 mains lead

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured markings

identifying the terminals in your plug proceed as follows:

The wire which is coloured GREEN-AND-YELLOW must be

connected to the terminal in the plug which is marked by

the letter E or by the safety earth symbol or coloured green

or green-and-yellow.

The wire which is coloured BLUE must be connected to the

terminal in the plug which is marked with the letter N or

coloured black.

The wire which is coloured BROWN must be connected to

the terminal in the plug which is marked with the letter L or

coloured red.

5.2 non-rewireable mains plugs 

If a non-rewireable plug is cut from a mains lead (for

whatever purpose) the plug MUST be disposed of in a way

to render it totally unusable. Considerable shock hazard

exists if the cut-off plug is inserted into a mains outlet.

5.3 fuse carrier

Should the plug fuse carrier be damaged or lost, the

correct replacement must be obtained from your dealer, or

from Naim Audio direct. Do not use the plug until the fuse

carrier is replaced.

5.4 plug fuses

Replace only with ASTA or BS 1362 approved fuses.

NOTE

This equipment has been tested and found to comply with the relevant EMC and Safety
Standards, and, where applicable, also complies with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult your Naim dealer or an experienced radio/TV technician for help.

Introduction

Содержание NA-P 200 - AMPLIFIER



















Отзывы: