NAIM i-SUPPLY, Руководство пользователя

Страница: 2 / 12

IMPORTANT
In order to comply with current European
safety regulations it is essential that the
Naim loudspeaker connectors supplied
with amplifiers and loudspeakers are used.
Do not under any circumstances allow
anyone to modify your Naim equipment
without first checking with the factory, your
dealer, or your distributor. Unauthorised
modifications will invalidate your
guarantee.
For your own safety do not under any
circumstances open Naim equipment
without first disconnecting it from the
mains.
Warning: an apparatus with CLASS I
construction shall be connected to a mains
socket outlet with a protective earthing
connection.
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable. To disconnect the equipment
from the mains remove the mains plug
from the mains outlet.
The following label is attached to all mains
powered equipment:
WA R N I N G
THIS APPARATUS
MUST BE EARTHED
Contents
Page Section
1 1 Equipment Installation
2 Connections
3 Mains Power Connection
2 4 General Installation
4 5 Product Introduction
6 NAPSC
5 7 i-Supply
8 Headline
6 9 Stageline
8 10 Declaration of Conformity
NOTE
This equipment has been tested and found
to comply with the relevant EMC and Safety
Standards, and, where applicable, also
complies with the limits for a class B digital
device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and
can radiate radio frequency and, if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and the receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult your Naim dealer or an
experienced radio/TV technician for help.