e4
mains input
and fuse
5.1 Hi-Cap rear
socket 1
socket 2
socket 3
socket 4
ch2
-ve
ch1
nc
socket 1, 2 & 3
+ve
-ve
+ve
ch1
ch2
socket 4
5 Power supply Installation
Power supplies should be installed on an equipment rack intended for the purpose in
their final location before connecting cables or switching on. ensure that power amplifiers
are switched off and the preamplifier volume is turned down before power supplies are
switched on. The power buttons are located on the front panel. Connection diagrams will
be found in the appropriate preamplifier or CD player owners manual.
many power supplies are heavy and care should be taken when lifting or moving them.
make sure that the surface on which they are to be placed can support their weight.
mains input
and fuse
5.2 Flatcap 2x rear
socket
1
socket
2
socket
4
socket
3
socket
5
power
switch
socket
6
ch2
ch1
nc
-ve
Inputs 2, 3, 4 & 6
+ve
-ve
+ve
ch1
ch2
sockets 1 & 5
mains input and fuse
5.3 naPsa rear
power output
mains input and fuse
5.4 naPsC rear
output lead to preamplifier
or Headline
Hi-Cap, Flatcap 2x, NAPSA, and NAPSC Power Supplies
