Nahita 601/3, Руководство пользователя, Страница: 4 / 9

Version 1, May 2020
2-1. Indicator light function
1) AUT
：
It flickers during self-tuning, it is not bright in any other state.
2) OUT
：
It is bright when heating output.
3) ALM
：
It is bright when there is a temperature alarm.
4) TIM
：
It is bright when time is set, it flickers in the process of timing.
2-2. Button function
1)
【
SET
】 ：
In normal state, press this button to enter the setting state.
2)
【 ◄
/AT
】 ：
“SHIFT” button. In the setting state, click this button to shift the set value.
In normal state, press this button for 6 seconds to enter the auto-tuning selection
state.
3)
【
▼
/RES
】 ：
“DEC” button. In the setting state, click this button to decrease the set
value.
If you keep pressing this button, the value will reduce continuously. In the normal
state, when the timer ends, press this button for 3 seconds, the controller will
restart to work .
4)
【 ▲ 】 ：
“INC” button. In the setting state, click this button to increase the set value.
If you keep pressing this button, the value will increase continuously.
3. Operation and using
3-1. When the controller is switched on, all displays light up for 2 seconds, display
windows show the version number and controller model for 2 seconds, then it starts
running.
3-2. Temperature and Time Setting
1) Without Timing Function :
In the normal state , press the “SET” button to enter the temperature setting state,
windows display the prompt "SP" and the temperature set point value. Using the
“SHIFT” , “DEC” and “INC” buttons, user can edit the temperature set value. Press the
“SET” button again, the controller will return to its normal state, the setting value will
be saved automatically.
2) With Timing Function :
In the normal state , press the “SET” button to enter the temperature setting state,
windows display the prompt “SP” and the temperature set point value. Re -press the
“SET” button to enter the time setting state, windows display the prompt “ST” and
the ti me set point value. Press the “SET” button again, the controller will return to its
normal state, the set values will be saved automatically.