EN
25
Charging Up the Battery
PLEASE NOTE!
•
The device should not be charged via a computer
because the high charging current could damage the
computer.
•
It is essential that you charge up the battery fully
before you
fi
rst use the device in order to achieve
the maximum charging capacity.
If the battery is
fully discharged during use, it must be fully charged
up again before it is next used.
You also require a USB mains adapter which matches the
technical data of the massage device (see rating plate or
“Technical Data”). This is not supplied with the device.
1
Make sure that the massage device is switched off.
Plug the USB C connector of the USB cable into the
charging socket (
6
) on the main device (
4
) and the USB
connector into the socket of a USB mains adapter.
2
Connect the USB mains adapter to an easily accessible
plug socket. The control lamp for vibration mode (VIBR)
fl
ashes during charging.
3
If the charge control lamp is permanently lit, the battery
is charged. Pull the USB mains adapter out of the plug
socket and then disconnect the USB cable from the
device.
