STEP 2.
With the Front/Rear Panels fastened slide the Bottom Panel
into the frame, no fastening required.
STEP 4.
Slot the Back Assembly into the Rear Leg and use (2) 1.5”
Barrel Bolts to fasten it to the Rear Leg.
STEP 3.
Slide the seat on top of the Front/Rear Panel and into the
slot on the Rear Leg, use (1) 3” Screw to fasten the seat to the Leg
Assembly.
STEP 5.
Use the Right Leg Assembly to cap off the other end. Make
sure all parts are slotted correctly then use (2) 1.5” Barrel Bolts for
the Back Assembly and (5) 3” Screws for the seat and panels.
ASSEMBLY
Congratulations on purchasing this Durawood Stowaway Bench. QUESTIONS REGARDING THIS PRODUCT? Call our customer service team, 252-758-0641.
RESIDENTIAL WARRANTY
- This quality product includes a FULL LIFETIME WARRANTY for RESIDENTIAL CUSTOMERS. In the unlikely event any splintering, rotting, cracking, peeling,
chipping, insect infestation or other damage should ever occur, The Hammock Source will replace this furniture, at no charge to you. Note that an original sales receipt must accompany any
returned product, along with a Return Authorization Number from Hammock Source customer service; call toll-free at 252-758-0641.
CONTRACTOR WARRANTY
- CONTRACTORS receive a FULL 7-YEAR WARRANTY. Follow the same steps outlined above.
MAINTENANCE -
Periodically check bolts after assembly and re-tighten when necessary.
#6157
3” SCREW
3” SCREW
BOTT
OM
BOTT
OM
PANEL
PANEL
SEAT
SEAT
BA
CK
BA
CK
ASSEMBL
Y
ASSEMBL
Y
1.5” BOLT
1.5” BOLT
3” SCREW
3” SCREW
1.5” BOLT
1.5” BOLT
RIGHT ARM
RIGHT ARM
ASSEMBLY
ASSEMBLY
