Nags Head Hammocks DOUBLE ROPE GLIDER Скачать руководство пользователя страница 2

Страница: 2 / 6

ASSEMBLY

STEP 2.

Position an upright as shown and secure it with (1) 3.5” Hex

bolt and a washer on each side of the material with (1) 4” Barrel Bolt

and Barrel Nut for the arm. Repeat for the other side.

STEP 4.

Place the center table in the frame as shown, use (3) 5” Hex

bolts, a washer on each side of the material and a lock nut to secure the

front and rear legs to the center frame.

STEP 5.

Attach center upright with (2) 5” Hex Bolts with a washer on

each side of the material and secure with a locknut.

STEP 3.

Attach front and rear table legs to the center table using (2) 5”

Hex Bolts, a washer on each side of the material and a lock nut as shown.

Note

Rear legs are longer than the front

Barrel Nut

Lock Nut

Washer

3.5” Hex Bolt

Lock Nut

4” Barrel Bolt

5” Hex Bolt

Содержание DOUBLE ROPE GLIDER

Страница 3: ...4 5 Barrel Bolts starting with the center upright STEP 7 Attach 2 Shorter Glider Base Spreaders to 2 Glider Leg Assemblies using 8 2 Barrel Bolts Note Beam hidden in image to show bolts The longer spreader is used in Step 9 Barrel Nut 4 5 Barrel Bolt 2 Barrel Bolt ...

Страница 4: ...nd 4 lock nuts to attach Glider Frame Assembly to Glider Bench Assembly Refer to detail image for correct hardware installation Lock Nut 2 5 Hex Bolt Washer Glider Base Hardware Installation Detail View Lock Nut Glider Arm 2 5 Hex Bolt Washer Washer ...

Страница 6: ...res 43 Long spreader measures 51 BODY BOX 1 Top Roll up 2 Outer Upright x 2 3 Center Upright 4 Center Front Leg x 2 5 Center Rear Leg x 2 6 Table Top 7 Body Frame 8 Left Glider Leg Assembly 9 Right Glider Leg Assembly 10 Shorter Glider Base Spreaders x 2 11 Long Glider Base Spreader 1 2 1 2 4 5 6 9 8 10 11 7 3 6136 ...