ASSEMBLY
STEP 2.
Position an upright as shown and secure it with (2) 3.5” Hex bolts
and a washer on each side of the material. Repeat for the other side.
STEP 3.
Attach front and rear table legs to the center table
using (2) 5” Hex Bolts, a washer on each side of the material
and a lock nut as shown.
Note :
Rear legs are longer than the front.
STEP 4.
Place the center table in the frame as shown, use (3) 5” Hex
bolts, a washer on each side of the material and a lock nut to secure the
front and rear legs to the center frame.
STEP 5.
Attach center upright with (2) 5” Hex Bolts with a washer on
each side of the material and secure with a locknut.
Barrel Nut
Lock Nut
Lock Nut
Lock Nut
Lock Nut
3.5” Hex Bolt
4” Barrel Bolt
5” Hex Bolt
5” Hex Bolt
5” Hex Bolt
