Nagra PL-L, Инструкция пользователя, Страница: 11 / 25

11
Battery installation
Turn over the remote control
and remove the screw
(screwdriver No 3).
Slide the housing from the front
panel.
Install the 9V battery
Reinstall the housing and lock the screw.
Product number for the remote receiver
Remove the top panel from the PL-L following the instructions described under
paragraph “Vacuum Tube Identification and Location”. Locate the Remote receiver
board in the right corner towards the front panel. Locate the 5 jumpers “ST1”.
The PL-L is factory set to work as product number “1”
The following positions can be set:
1 2 3 4 5
= Product
number 5
1 2
3
4 5
= Product
number 1
1 2 3 4 5
= Product
number 2
1 2
3
4 5
= Product
number 3
1 2 3 4 5
= Product
number 4
1 2 3 4 5
= Product
number 6