6
Nagra -
Pyramid Monoblock Amplifier
Installation
Placement of the Pyramid
To take full benefit of the monoblock design of the Pyramid, you should
place them as close as possible to the loudspeaker’s cabinet. This will
allow shortening the sensitive link - the speaker cables.
If you have a thick carpet, it is advisable to place the Pyramids on
small stands to allow an optimal thermal dissipation.
Installing the fuse
You should start by installing the fuse.
Apply a pressure with your thumb to
release the fuse compartment.
Each monoblock comes with a set of 5 or 10A fuses. Make sure the
supplied fuses have the correct value (refer to the following table). In
the event that the fuses don’t have the correct value, please contact
your dealer.
Put the
compartment
back in place
Mains voltage
Fuse
100 - 120 V
10 A
220 - 250 V
5 A
