Nagra LINO, Руководство пользователя

Страница: 72 / 77

Audio Technology Switzerland S.A. - 72 -
2 FAQ
You can solve many problems that may occur when using LINO using the following tips.
Problems
The reasons and how to solve them
The power won’t turn on. y Batteries inserted incorrectly or in the incorrect polarity
--------Insert batteries correctly in the correct orientation.
y Battery level is critically low and it won’t turn on
--------Please retry your request after replacing the batteries.
y
Buttons locked by HOLD button
--------Turn HOLD switch off and retry.
There’s no sound in
speaker.
y
The output volume is too low
--------Increase the output volume gradually.
y Earphones were inserted
--------Speaker shuts off automatically when earphones are inserted. It will work
again after pulling out the headphones.
y
[Speaker] option OFF in system settings.
--------Speaker will never work if this option is turned OFF, please set it to ON.
Can’t record y Lack of SD Card’s storage capacity
--------Replace the SD Card with a new one or try the operation again after
deleting some files from the SD Card.
There’s no sound in the
recording file. y Recording level was too low.
--------Increase the recording gain, and then re-record.
y You haven’t inserted external microphone when chosen [External Sound Pick-up]
as input device or haven’t connect LINE IN when [Line Input] is chosen.
--------Connect external microphone or LINE IN, and then re-record.
--------Change this option into [Internal Sound Pickup], and then re-record.