Nagra HD DAC X, Руководство пользователя

Страница: 10 / 32

Choosing a location
The HD DAC X is designed exclusively for indoor use in a moderate climate.
The HD DAC X is contained in two chassis: one audio device and one power supply.
These chassis feature an anti-vibration base that allows for putting either one chassis on
top of the other or one chassis next to the other, while remaining completely insensitive to
vibration. They must be installed horizontally on a flat, firm and stable stand. There must
be enough space all around the chassis for adequate ventilation. Ventilation should not
be impeded by covering the ventilation openings with items such as newspapers, table-
cloths, curtains, etc.
Adjusting the level of the HD DAC X / HD PSU
Each chassis has four decoupling feet whose height can be ad-
justed with a wheel (knurled part). Turning the wheel adjusts the
height of the foot and thus the level of the chassis. When the
chassis are installed one on top of the other, the four feet of the
upper chassis are in contact with the four feet of the lower chassis
through four ceramic balls supplied with the HD DAC X. The balls
are seated in the small indentations at the top of each foot of the
lower chassis (preferably the power supply chassis).
ceramic
balls ↓
↓
INSTALLATION OF YOUR HD DAC X
HD DAC X
02