Issue: January 2004
Page 20
14.7 MIKE
This menu gives access to the selection of the microphone type (routing,
Mono or Stereo) as well as the 48V power supply.
14.7.1 48V PHANTOM MIKE POWER.
If Phantom microphones are used the 48V must be turned on. This
selection needs to be confirmed by pressing the right arrow key. On the
main display, the text will appear next to the battery status.
14.7.2 MIKE TYPE, “FAT 16” MODE ONLY.
If “
MONO
” is selected and a stereo pair of microphones is connected
and the “
FILE FORMAT
” is set to a mono recording, both channels will
be mixed and reduced by 3 dB before they are recorded as a mono
channel.
If “
STEREO
” is selected and a mono microphone is connected and the
“
FILE FORMAT
” is set to a stereo recording, only the left channel will be
recorded.
If “
MONO
” is selected and a mono microphone is connected and the
“
FILE FORMAT
” is set to a stereo recording, both channels will have the same signal.
48V. Mike power
Off
On
On
Mike type
Mono
Stereo
Mono
Mike
Mike type
48V, Mike power
48