Nagra ARES-BB Plus Скачать руководство пользователя

Страница: 4 / 33

Issue: January 18 2005

Page 4

This manual describes the use of the ARES-BB

in the FAT mode.

For using the Ares-BB

in the NFS mode, please refer to the previous Ares-P II manual or to the

Ares-P / RCX220 manual.

1DELIVERED WITH.

1 Jack 6.3 mm (90 degrees) connector, 1 USB cable, 1 CDR with Ares Import, Digigram import

software and manuals.

2 INSTALLING THE BATTERIES (NB-BB OPTION).

On the rear side of the machine, loose the 2 “thumb” screws until the battery box can be removed. To

open

the

battery

compartment, slide the

inner cover until it is fully

open. If dry cells are used

verify that the battery

compartment switch is in

the OFF position. Install

the 6 “AA” cells observing

the polarity and replace

the inner cover. Lock the

battery compartment back

to the machine.

Important note:

In the tools sub-menus select the corresponding type of battery pack (AA cells or Li-ion)

When using the external power supply, check that the switch on the battery compartment is set to

“OFF” before installing dry cells.

In the OFF position, the charger circuitry is not activated and if an external power supply is connected,

the machine will run from external supply and not from the batteries.

When an external power supply is connected to the Ares-BB

, the green led turns on. During charge,

the yellow led turns on. The Ares-BB+ charges with approx. 300 mA. Charging stops automatically

(yellow led turns off). If the yellow led never turns off, it means that one or more cells are defective. If

the charger switch is turned on and no batteries are installed while the machine receives external

power, the yellow led starts blinking fast.

3 INSTALLING THE FLASHCARD.

Insert the flashcard on the right side of the machine and push it fully home (eject button fully out).

Compact flash cards must be installed using an adapter.

NOTE: The software version, for the Ares-BB

allows, ATA cards, compact flash cards and Micro-drive

cards. Linear flash cards and Strata flash cards can only be used in the NFS mode (Nagra File

Format).

Important note:

When running the machine in the FAT mode, only ATA, Compact flash cards and Micro-drive cards

can be used.

4 POWER ON, POWER OFF.

Press the “POWER ON” button (1) for 1 second and the machine switches on. To switch “OFF” the

machine push the same button again for 1 second.

Attention: the machine cannot be switched OFF during RECORD or EDITING.

Batt. Type Capacity Charging time Record mode Manufactory

NimH

1300 mAh

4h30

5h30

NimH

2300 mAh

8h00

11h35

Sanyo

Li-Ion

2400 mAh

8h30

12h30

Saft

Dry cells

12h50

Panasonic, Alkaline

Содержание ARES-BB Plus


































Результаты поиска

Содержание ARES-BB Plus

Отзывы:

Похожие инструкции для ARES-BB Plus

Бренды по названию

Популярные бренды

Nagra ARES-BB Plus, Руководство пользователя

Результаты поиска

Содержание ARES-BB Plus

Отзывы:

Похожие инструкции для ARES-BB Plus

Бренды по названию

Популярные бренды