Instruction
Manual
11
The Swop S703 is equipped with 3 engines.
Use the backrest inclination keys to tilt the
backrest up and down.
Use the legrest inclination keys to tilt the legrest
up and down.
The height of the table can be adjusted too. To
lift the table, simply push the UP button on the
hand switch. Once the desired height is achie-
ved, release the button. To lower the table, do the
same operation with the DOWN button. (Third
row of keys)
Operation
Hand controller
2
Up &
Down
Legrest
inclination
Backrest
inclination
A foot controller is available as an option and
it can be ordered separately. You can adjust all
the 3 movements of the bed by means of the foot
controller.
In order to use both the hand controller and the
foot controller simultaneously, you need a bran-
ched cable and you must plug it into the control
box. See instructions in picture below.
Foot controller
Connecting the foot controller
Locate the control box inside the table base
frame. Take the safety piece that locks the
conectors into each plug and disconnect the
cable HS.
Connect the branched cable in the plug named
HS. Place again the safety piece to lock the
connectors.
Now you can connect the handcontroller and
the foot controller in the two plugs.
