Essential Settings
7
The height of the table can be adjusted from the 4 sides of the table thanks to a very intuitive perimeter device. The mechanism on both sides
consists of 2 grey long overhanging bars which are fully integrated in the base making the design simply beautiful. When the physiotherapist
presses the end of the bar with his foot, the table goes up or down; the opposite end of this bar is used to activate the opposite movement (up or
down). Do not press just in the middle of the bar, since this is the supporting axis of the swinging bar and, at this point, the height the mechanism
does not work. In the front and rear part of the table, the height motion is operated by means of 2 foot switches for both up and down movements
respectively. The arrows show the sense of the movement (up or down). In the case of N’G0304-2 (2 engines), the perimeter foot switch controls
the height while the second movement is controlled by 2 buttons placed one side of the table.
Perimeter foot switch
3
3
Instruction
Manual
3
N’GO
3
3
