Nagano Keiki KH15 3 Series, Руководство пользователя

Страница: 8 / 24

8 Y-KH15-007A Rev.3
4. SPECIFICATIONS
■
4.1 Product Specifications
Item Details
Model number
KH15-
□□
3 KH15-
□□
4,
□□
6
Pressure sensor seal
system
O-ring type Weld type
Pressure range
*1
0 to 0.1, 0 to 0.3, -0.1 to 0 MPa
-0.1 to 0.1, -0.1 to 0.3 MPa -0.1 to 0.5 => -0.1 to 2 MPa
0 to 0.5 => 0 to 120 MPa
*7
Maximum allowable
pressure
*2
200% of pressure range
200% of pressure range
(150% for 35 and 50 Mpa
120% for 70, 100 and 120 Mpa)
Supply voltage
24 V DC +/-10% or 12 V DC +/-10%, 15 V DC +/-10%
(Only voltage output is selectable).
Output type
4 to 20 mA DC (load resistance 500
Ω max.)
1 to 5 V DC (load resis
tance 10 kΩ min.)
0 to 5 V DC
(load resistance 10 kΩ min.)
Accuracy (including
linearity, hysteresis and
repeatability)
+/-1.0%F.S.
・
+/-0.25%F.S.
*3
(However, the pressure range is
3.5 to 20 MPa).
・
+/-0.5%F.S.
(However, the pressure range is
0.5 to 50 MPa).
・
+/-1.0%F.S.
Operating temp. range -20 to 70 °C (non-freezing, non-condensing)
*4
Storage temp. range -30 to 80 °C (non-freezing, non-condensing)
Temperature
characteristics
・
+/-0.025%F.S./°C with +/-0.25%F.S. accuracy (both zero/ span)
・
+/-0.05%F.S./°C with +/-0.5%F.S. accuracy (both zero/ span)
・
+/-0.1%F.S./°C with +/-1.0%F.S. accuracy (both zero/ span)
Responsiveness 1 ms or less
Wetted materials
Diaphragm : SUS630 (17-4PH)
Fitting : SUS316
O-ring : NBR (standard)
: EPDM
: Fluorine
: Chloroprene
KH15-
□□
4
Diaphragm: SUS630 (17-4PH)
Fitting: SUS316
KH15-
□□
6
Diaphragm: Co-Ni alloy
*7
Fitting: SUS316
Thread size
G1/4B, G3/8B, G1/2B
*7
, R1/8, R1/4, R3/8, R1/2,
1/4 NPT, 3/8NPT, 1/2 NPT
(R and NPT threads: for the pressure range of 50 MPa or less).
Weight
KH15-J
□□
(small terminal box): approx. 220 g
KH15-K
□□
(large terminal box): approx. 360 g
Case structure
*5
Equivalent to IP67 (based on JIS C 0920)
CE marking
*6
Applicable standards: EN61326-1:2013 EN61326-2-3:2013
<Table 4-1>
< Table 4-1 >