![background image](http://html2.mh-extra.com/html/nafvjgs/ts-30/ts-30_programming-manual_3059525051.webp)
codes . The setting range is 0ms
~
25500ms, and the default duration is 1000ms .
200 ms without interval
500ms **1000ms
3000ms 5000ms
3.3.2 The same code reading delay
In order to prevent the same barcode from being read multiple times in continuous mode, the reading
module can be required to delay reading the same barcode in this mode for a set period of time . The same
code reading delay means that after reading a bar code, the same bar code is refused to be read within the
set time . It can be read and output only after the time period is exceeded . By default, the same code
reading delay is turned off .
The same code reading delay is turned on** the same code reading delay is turned
off
Read the following setting codes to set the same code reading delay time . Setting range : 0ms
~
Содержание TS-30
